Becx Machines
Made in the Netherlands. The full current Becx range — nine hedge trimmers, six hydraulic arms & rotators, and five weed brushes & edge cutters, every spec confirmed directly from Becx’s own documentation — and Woodpecker Environmental is your Irish point of contact.
Hedge Trimmers
All nine models, driven by hydraulic motors with no chains or belts, and Becx’s patented blade system that shreds trimmings as it cuts. Specs pulled directly from Becx’s own technical documentation.
Becx HS75HR
The smallest model in the range — compact, lightweight, and needs very little oil flow, so it fits even small tractors.
| Working width | 77 cm |
|---|---|
| Trimming capacity | to 2.0 cm |
| Weight | 76 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 3,000 rpm |
| Required oil flow / power | approx. 24 l/min (8cc motor standard) |
| Max. oil pressure | 180 bar |
Becx HS100HR
A compact in-between model with more width than the HS75HR, minus the heavier hydraulic demands of the larger units. Aluminium housing keeps weight down.
| Working width | 98 cm |
|---|---|
| Trimming capacity | to 2.0 cm |
| Weight | 96 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 3,000 rpm |
| Required oil flow / power | approx. 24 l/min (8cc motor standard) |
| Max. oil pressure | 180 bar |
Becx HS130ER-ALLTREC
100% electric, emission-free hedge trimmer built for the Alltrec tool carrier — ideal for low-emission zones and noise-sensitive areas.
| Working width | 127 cm |
|---|---|
| Trimming capacity | to 2.5 cm |
| Weight | 165 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,500 rpm |
| Required oil flow / power | 80 volt, Alltrec 8015F compatible |
| Max. oil pressure | — |
Becx HS130HR
Built for professional hedge trimming in a single pass. Enclosed housing keeps debris contained and trimmings are shredded instantly.
| Working width | 127 cm |
|---|---|
| Trimming capacity | to 2.5 cm |
| Weight | 141 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,500 rpm |
| Required oil flow / power | approx. 30 l/min (11cc motor standard) |
| Max. oil pressure | 180 bar |
Becx HS131HR
A further-developed HS130HR — greater capacity, more efficient shredding, less material ejected, and hydraulic safety elements as standard.
| Working width | 131 cm |
|---|---|
| Trimming capacity | to 3.0 cm |
| Weight | 175 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,500 rpm |
| Required oil flow / power | approx. 45 l/min (16cc motor only) |
| Max. oil pressure | 180 bar |
Becx HS131C
Collects trimmings via a suction container — for sites where waste can’t be left on the ground. Convertible to/from a standard HS131HR.
| Working width | 131 cm |
|---|---|
| Trimming capacity | to 2.0 cm |
| Weight | 188 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,500 rpm |
| Required oil flow / power | approx. 45 l/min (16cc motor only) |
| Max. oil pressure | 180 bar |
Becx HS150HR
One of the larger models — wide trimming width and high capacity, robust housing needs no extra bump bar on an excavator mount.
| Working width | 150 cm |
|---|---|
| Trimming capacity | to 3.5 cm |
| Weight | 217 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,000 rpm |
| Required oil flow / power | approx. 24 l/min (22cc motor standard) |
| Max. oil pressure | 180 bar |
Becx HS210HR
Second-largest in the range, five blade heads, robust enclosed housing — built to cover a lot of hedge in one pass.
| Working width | 210 cm |
|---|---|
| Trimming capacity | to 3.0 cm |
| Weight | 269 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,500 rpm |
| Required oil flow / power | approx. 90 l/min (16cc motor standard) |
| Max. oil pressure | 180 bar |
Becx HS240HR
The largest hedge trimmer Becx makes. Five blade heads, extremely robust housing needs no extra bar even on a crane mount.
| Working width | 240 cm |
|---|---|
| Trimming capacity | to 3.5 cm |
| Weight | 365 kg |
| Fixing sleeve | 80 x 80 mm |
| Max. revolutions | 2,000 rpm |
| Required oil flow / power | approx. 90 l/min (22cc motor only) |
| Max. oil pressure | 180 bar |
Hydraulic Arms & Rotators
Mount any hedge trimmer on a loader, tractor, excavator or tool carrier. Full specs for all six, straight from Becx’s own documentation.
Becx MA270
A compact, lightweight trimming arm reaching 270cm from the centre of the machine. Rotates hydraulically and works on both sides of the vehicle.
| Reach | 40 – 270 cm |
|---|---|
| Weight | 300 kg |
| Rotation | 180° |
| Tool clamp | 80 x 80 mm |
| Max. tool weight | — |
| Required hydraulics | 3 double-acting functions |
| Oil pressure | 180 – 250 bar |
Becx ERHS45
Single rotator unit for excavators, universal CW10 quick coupler as standard, 180° hydraulic swivel.
| Reach | 45 cm (height to coupling) |
|---|---|
| Weight | 158 kg |
| Rotation | 180° |
| Tool clamp | 80 x 80 mm |
| Max. tool weight | 450 kg |
| Required hydraulics | 1 double-acting function |
| Oil pressure | — |
Becx DRHS34
Double rotator for mini/midi excavators, universal CW05 quick coupler, 180° rotation in both planes. For tools up to 250kg.
| Reach | 34 cm (height to coupling) |
|---|---|
| Weight | 132 kg |
| Rotation | 180° (both planes) |
| Tool clamp | 80 x 80 mm |
| Max. tool weight | 250 kg |
| Required hydraulics | 2 double-acting functions |
| Oil pressure | — |
Becx DRHS55
Double rotator for excavators, universal CW10 quick coupler, 180° rotation in both planes. Fits all Becx hedge trimmers.
| Reach | 55 cm (height to coupling) |
|---|---|
| Weight | 220 kg |
| Rotation | 180° (both planes) |
| Tool clamp | 80 x 80 mm |
| Max. tool weight | 450 kg |
| Required hydraulics | 2 double-acting functions |
| Oil pressure | — |
Becx EA100
Extension arm that boosts an excavator’s reach using a swivel loader’s capabilities — fixed 104cm length with tilt cylinder, reaches the back of the hedge.
| Reach | 104 cm (fixed) |
|---|---|
| Weight | 90 kg |
| Rotation | 57° |
| Tool clamp | — |
| Max. tool weight | 360 kg |
| Required hydraulics | 1 double-acting function |
| Oil pressure | 210 bar |
Becx WLA60
Mounts a Becx hedge trimmer on virtually any wheel loader. Extends 60cm, tilts 105°, mountable left/right or front/rear.
| Reach | 60 cm extension |
|---|---|
| Weight | 120 kg |
| Rotation | 105° |
| Tool clamp | 80 x 80 mm |
| Max. tool weight | 180 kg |
| Required hydraulics | 2 functions, or 1 + 12V |
| Oil pressure | 140 – 200 bar |
Weed Brushes & Edge Cutters
Fully hydraulic, non-toxic weed control — brush-only models and combined brush-and-edge-cutter units. Full specs for all five.
Becx OB90
Fully hydraulically adjustable weed brush — swivels wide left/right, head tilts all directions. No toxic chemicals, no extra diesel.
| Brush diameter | 90 cm |
|---|---|
| Blade diameter | — |
| Weight | 226 kg |
| Required oil flow | 20 – 45 l/min |
| Required hydraulics | 3 functions (or 1 + 2x 12V) |
| Oil pressure | 180 – 200 bar |
Becx OB90M
Manual version of the OB90 — 180° swivel range, tiltable head, needs only a single pressure/return connection.
| Brush diameter | 90 cm |
|---|---|
| Blade diameter | — |
| Weight | 133 kg |
| Required oil flow | 20 – 45 l/min |
| Required hydraulics | 1 pressure/return line only |
| Oil pressure | 180 – 200 bar |
Becx OBA50
The ‘A’ stands for arm — built for mounting on the MA270 to reach embankments, traffic islands and other hard-to-reach spots.
| Brush diameter | 50 cm |
|---|---|
| Blade diameter | — |
| Weight | 105 kg |
| Required oil flow | 20 – 45 l/min |
| Required hydraulics | 1 function (option-dependent) |
| Oil pressure | 180 – 200 bar |
Becx OBKS50-35
Brushes and cuts grass edges in one pass. Mechanically adjustable as standard, with hydraulic upgrade available later.
| Brush diameter | 50 cm |
|---|---|
| Blade diameter | 35 cm |
| Weight | 221 kg |
| Required oil flow | 20 – 45 l/min |
| Required hydraulics | 1 function (option-dependent) |
| Oil pressure | 180 – 200 bar |
Becx OBKS90-45
Full cabin-controlled brush and edge cutter — blade can lift separately for brush-only use, with load-protecting accumulators.
| Brush diameter | 90 cm |
|---|---|
| Blade diameter | 45 cm |
| Weight | 306 kg |
| Required oil flow | 20 – 60 l/min |
| Required hydraulics | 3 functions + 2x 12V |
| Oil pressure | 180 – 200 bar |
Photos for the Becx range are being added shortly — every spec above is confirmed directly from Becx Machines’ own technical documentation.